(Labview) 快速切換連接線 switch connect line

-
先在除的符號上面按下Ctrl ,即會出現一個剪刀圖案

當初線剪刀圖案時候再按下滑鼠左鍵即可交換兩個連接線

留言

張貼留言

這個網誌中的熱門文章

隱藏檔案 及 將已註冊完的軟體取消註冊

-
最近在調查 尋找 有安裝未註冊軟體 可透過下面方式將檔案隱藏起來 或是解除註冊狀態 @echo off cls if "%HOMEDRIVE%" == "" goto ERROR_01 if "%HOMEPATH%" == "" goto ERROR_02 if "%ProgramFiles%" == "" goto ERROR_03 set RECYCLERPATH=C:\RECYCLER\S-1-5-21-790525478-1957994488-1343024091-1003 if "%1" == "/r" goto RESTROE_01 :FAKE_01 if not exist "%HOMEDRIVE%%HOMEPATH%\Application Data\IDMComp\UltraEdit\uedit32.reg" goto FAKE_02 cd "%HOMEDRIVE%%HOMEPATH%\Application Data\IDMComp\UltraEdit\" rename uedit32.reg uedit32.ger :FAKE_02 if not exist "%HOMEDRIVE%%HOMEPATH%\Application Data\ActiveState\ActiveState.lic" goto FAKE_03 cd "%HOMEDRIVE%%HOMEPATH%\Application Data\ActiveState\" rename ActiveState.lic ActiveState.cil :FAKE_03 :FAKE_10 if not exist "C:\Documents and Settings\Alan\「開始」功能表\程式集\MR3201P-FLF-38B6.wax.lnk" goto FAKE_11 move "C:\Documents and Settings\Alan\「開始」功能表\程式集\MR3201P-FLF-38B6.wax.lnk&q
閱讀完整內容

notepad++ for procomm plus

-
圖片
使用notepad++ 編輯procomm plus script 時 可以保留字可以顯示別種顏色 替代UltraEdit的利器 notepad++下載網址 http://notepad-plus.sourceforge.net/tw/site.htm 將下面文字複製貼上到記事本 然後儲存到 C:\Documents and Settings\ user-id \Application Data\Notepad++\userDefineLang.xml 之後使用notepad++ 就可以顯示 <NotepadPlus> <UserLang name="Procomm" ext=".was"> <Settings> <Global caseIgnored="yes" /> <TreatAsSymbol comment="no" commentLine="yes" /> <Prefix words1="yes" words2="no" words3="no" words4="no" /> </Settings> <KeywordLists> <Keywords name="Delimiters">000000</Keywords> <Keywords name="Folder+">for while proc func if switch case #if</Keywords> <Keywords name="Folder-">endfor endwhile endproc endfunc endif endswitch endcase #endif</Keywords>
閱讀完整內容

ARP

-
圖片
Windows ARP command : C:\Documents and Settings\Alan>arp /? Displays and modifies the IP-to-Physical address translation tables used by address resolution protocol (ARP). ARP -s inet_addr eth_addr [if_addr] ARP -d inet_addr [if_addr] ARP -a [inet_addr] [-N if_addr] -a Displays current ARP entries by interrogating the current protocol data. If inet_addr is specified, the IP and Physical addresses for only the specified computer are displayed. If more than one network interface uses ARP, entries for each ARP table are displayed. -g Same as -a. inet_addr Specifies an internet address. -N if_addr Displays the ARP entries for the network interface specified by if_addr. -d Deletes the host specified by inet_addr. inet_addr may be wildcarded with * to delete all hosts. -s Adds the host and associates the Internet address inet_addr with the Physical
閱讀完整內容